Pump Series


80 Series® (Engine Driven)

80 Series® pumps are designed for non-stop workloads. The straight-in-suction design of these high-efficiency pumps guarantees quick, positive self-priming and allows them to operate at high suction levels than most other self-priming centrifugal pumps. Liquid enters directly into the impeller eye. A suction check valve presents in-line return flow when the pump is shut off. And, because 80 Series pumps have few moving parts, maintenance is minimal. 80 Series pumps are available with self-lubricated mechanical shaft seals.

80 Series (Engine Driven)  Self-Priming Centrifugal Pumps
Specifications
Size 2" (50 mm), 3" (80 mm), 4" (100 mm), 6" (150 mm), 8" (200 mm), 10" (250 mm)
Max Capacity 3200 GPM (202 lps)
Max Head 210' (64 m)
Max Solids 2-1/2" (64 mm)
Max Temperature 160 F (71 C)
Materials of Construction Aluminum, Cast Iron
Horsepower 3 HP - 103 HP
Item Size Seal
810A2-4045T 10 x 10 Double Grease
82C1-1B20 2 x 2 Silicon Carbide
82C1-GX160 2 x 2 Silicon Carbide
82D1-GX160 2 x 2 Silicon Carbide
82D2-GX160 2 x 2 Double Grease
82D52-GX160 2 x 2 Silicon Carbide
82D-GX160 2 x 2 Double Grease
82E2-GX270 2 x 2 Double Grease
82E-GX270 2 x 2 Double Grease
83A2-GX270 3 x 3 Double Grease
83B52-GX390 3 x 3 Silicon Carbide
84A2-F3L 4 x 4 Double Grease
86A2-4024H 6 x 6 Double Grease
86A2-F3L 6 x 6 Double Grease
86A2-F4L 6 x 6 Double Grease
84A2-QSF2.8P FT4 4 x 4 Double Grease
86A2-QSF2.8P FT4 6 x 6 Double Grease
82E1-L100W FT4-X 2 x 2 Carbon/Ceramic
Straight-In Suction Design
Exclusive 80 Series pump design provides higher suction lift, increased efficiency and allows pumps to operate at higher suction lifts than most other self-priming centrifugal pumps.
Multiple Seal Options
80 Series pumps are available with Gorman-Rupp grease seals or self-lubricated mechanical seals.
High Efficiency Impeller
F_80SeriesEngineDriven_3.jpg Multi-vane open impeller is designed for high efficiency and will pass up to 2-3/8" (60 mm) solids, depending on pump model.
Replaceable Wearplate
F_80SeriesEngineDriven_4.jpg Replaceable wearplate allows for inexpensive maintenance during the life of the pump. No expensive castings to replace. Extra-thick construction for life.

Use Gorman-Rupp's G.R.A.S.P. Pump Selection Program